CAS 90076-65-6|Lithium bis(trifluoromethanesulphonyl)imide
Introduction：Basic information about CAS 90076-65-6|Lithium bis(trifluoromethanesulphonyl)imide, including its chemical name, molecular formula, synonyms, physicochemical properties, and safety information, etc.
| Common Name | Lithium bis(trifluoromethanesulphonyl)imide | ||
|---|---|---|---|
| CAS Number | 90076-65-6 | Molecular Weight | 287.087 |
| Density | 1,334 g/cm3 | Boiling Point | 190.5ºC at 760 mmHg |
| Molecular Formula | C2F6LiNO4S2 | Melting Point | 234-238 °C(lit.) |
| MSDS | ChineseUSA | Flash Point | 69ºC |
| Symbol | GHS05, GHS06, GHS08 | Signal Word | Danger |
Names
| Name | Lithium bis(trifluoromethanesulphonyl)imide |
|---|---|
| Synonym | More Synonyms |
Chemical & Physical Properties
| Density | 1,334 g/cm3 |
|---|---|
| Boiling Point | 190.5ºC at 760 mmHg |
| Melting Point | 234-238 °C(lit.) |
| Molecular Formula | C2F6LiNO4S2 |
| Molecular Weight | 287.087 |
| Flash Point | 69ºC |
| Exact Mass | 286.933289 |
| PSA | 88.28000 |
| LogP | 2.61350 |
| InChIKey | QSZMZKBZAYQGRS-UHFFFAOYSA-N |
| SMILES | O=S(=O)([N-]S(=O)(=O)C(F)(F)F)C(F)(F)F.[Li+] |
| Water Solubility | H2O: 10 mg/mL, clear, colorless |
Safety Information
| Symbol | GHS05, GHS06, GHS08 |
|---|---|
| Signal Word | Danger |
| Hazard Statements | H301 + H311-H314-H373-H412 |
| Precautionary Statements | P273-P280-P301 + P310 + P330-P303 + P361 + P353-P304 + P340 + P310-P305 + P351 + P338 |
| Personal Protective Equipment | Eyeshields;Faceshields;full-face particle respirator type N100 (US);Gloves;respirator cartridge type N100 (US);type P1 (EN143) respirator filter;type P3 (EN 143) respirator cartridges |
| Hazard Codes | T:Toxic; |
| Risk Phrases | R24/25;R34;R52/53 |
| Safety Phrases | S22-S26-S36/37/39-S45-S61 |
| RIDADR | UN 2923 8/PG 2 |
| WGK Germany | 2 |
| Packaging Group | II |
| Hazard Class | 8 |
| HS Code | 2924199090 |
Customs
| HS Code | 2924199090 |
|---|---|
| Summary | 2924199090. other acyclic amides (including acyclic carbamates) and their derivatives; salts thereof. VAT:17.0%. Tax rebate rate:13.0%. . MFN tariff:6.5%. General tariff:30.0% |
Articles16
More Articles| Nanoporous Cathodes for High-Energy Li-S Batteries from Gyroid Block Copolymer Templates. ACS Nano 9 , 6147-57, (2015) This study reports on a facile approach to the fabrication of nanoporous carbon cathodes for lithium sulfur batteries using gyroid carbon replicas based on use of polystyrene-poly-4-vinylpyridine (PS-... | |
| Preparation and evaluation of surface-bonded tricationic ionic liquid silica as stationary phases for high-performance liquid chromatography. J. Chromatogr. A. 1396 , 62-71, (2015) Two tricationic ionic liquids were prepared and then bonded onto the surface of supporting silica materials through "thiol-ene" click chemistry as new stationary phases for high-performance liquid chr... | |
| Development of bipolar all-solid-state lithium battery based on quasi-solid-state electrolyte containing tetraglyme-LiTFSA equimolar complex. Sci. Rep. 5 , 8869, (2015) The development of high energy-density lithium-ion secondary batteries as storage batteries in vehicles is attracting increasing attention. In this study, high-voltage bipolar stacked batteries with a... |
Synonyms
| Lithium bis(trifluoromethanesulfonyl)imide |
| Lithium bis[(trifluoromethyl)sulfonyl]azanide |
| FXFFSWMSWXFFF &&Li salt |
| MFCD00210017 |
| lithium,bis(trifluoromethylsulfonyl)azanide |
| Methanesulfonamide, 1,1,1-trifluoro-N-[(trifluoromethyl)sulfonyl]-, lithium salt (1:1) |
| Bis(trifluoromethane)sulfonimide lithium salt |
| Lithium bis(trifluoromethanesulphonyl)imide |
| 1,1,1-Trifluoro-N-[(trifluoromethyl)sulfonyl]methanesulfonamide lithium salt (1:1) |
| EINECS 415-300-0 |
