CAS 2155-94-4|3-Methyl-2-buten-1-amine
Introduction：Basic information about CAS 2155-94-4|3-Methyl-2-buten-1-amine, including its chemical name, molecular formula, synonyms, physicochemical properties, and safety information, etc.
| Common Name | 3-Methyl-2-buten-1-amine | ||
|---|---|---|---|
| CAS Number | 2155-94-4 | Molecular Weight | 85.147 |
| Density | 0.8±0.1 g/cm3 | Boiling Point | 114.1±9.0 °C at 760 mmHg |
| Molecular Formula | C5H11N | Melting Point | 0ºC |
| MSDS | ChineseUSA | Flash Point | 19.6±10.9 °C |
| Symbol | GHS02, GHS05, GHS07 | Signal Word | Danger |
Names
| Name | N,N-Dimethylallylamine |
|---|---|
| Synonym | More Synonyms |
Chemical & Physical Properties
| Density | 0.8±0.1 g/cm3 |
|---|---|
| Boiling Point | 114.1±9.0 °C at 760 mmHg |
| Melting Point | 0ºC |
| Molecular Formula | C5H11N |
| Molecular Weight | 85.147 |
| Flash Point | 19.6±10.9 °C |
| Exact Mass | 85.089149 |
| PSA | 3.24000 |
| LogP | 1.10 |
| Vapour Pressure | 20.2±0.2 mmHg at 25°C |
| Index of Refraction | 1.443 |
| InChIKey | GBCKRQRXNXQQPW-UHFFFAOYSA-N |
| SMILES | C=CCN(C)C |
| Storage condition | 0-6°C |
| Stability | Stable. Incompatible with strong oxidants. |
| Water Solubility | Soluble |
Safety Information
| Symbol | GHS02, GHS05, GHS07 |
|---|---|
| Signal Word | Danger |
| Hazard Statements | H225-H314-H332 |
| Precautionary Statements | P210-P280-P305 + P351 + P338-P310 |
| Personal Protective Equipment | Faceshields;full-face respirator (US);Gloves;Goggles;multi-purpose combination respirator cartridge (US) |
| Hazard Codes | F:Flammable;Xi:Irritant; |
| Risk Phrases | R11;R36/37/38 |
| Safety Phrases | S16-S26-S36/37/39-S45-S37/39 |
| RIDADR | UN 2733 3/PG 2 |
| WGK Germany | 3 |
| Packaging Group | I; II; III |
| HS Code | 29211980 |
Customs
| HS Code | 2921199090 |
|---|---|
| Summary | 2921199090 other acyclic monoamines and their derivatives; salts thereof VAT:17.0% Tax rebate rate:9.0% Supervision conditions:none MFN tariff:6.5% General tariff:30.0% |
Articles2
More Articles| Preparation of active antibacterial LDPE surface through multistep physicochemical approach II: graft type effect on antibacterial properties. Colloids Surf. B Biointerfaces 102 , 842-8, (2013) Three monomers (allylamine, N-allylmethylamine and N,N-dimethylallylamine) were used for grafting onto air plasma activated LDPE surface. Antibacterial agent triclosan was anchored on such substrates.... | |
| Chemistry of gas-phase sequencing: alternative bases. Biol. Chem. Hoppe-Seyler 368(3) , 195-8, (1987) The currently used base for gas-phase sequencing, trimethylamine, can be substituted by more hydrophobic tertiary amines without any problems. We used mainly N,N-dimethylallylamine and 3-(dimethylamin... |
Synonyms
| N-Allyl-dimethylamin |
| 1-Dimethylamino-2-propene |
| 1-Amino-3-methyl-2-butene |
| N,N-methyl-allyl amine |
| 3-dimethylaminoprop-1-ene |
| MFCD00038234 |
| 2-Buten-1-amine, 3-methyl- |
| Allylamine,N,N-dimethyl |
| ALLYLDIMETHYLAMINE |
| 3-Methyl-2-buten-1-amine |
| N,N-dimethyl-2-propen-1-amine |
| N-ALLYLDIMETHYLAMINE |
| EINECS 218-458-7 |
| 3-methylbut-2-en-1-amine |
| N-ALLYDIMETHYLAMINE |
| Dimethylallylamine |
| N-ALLYL-N,N-DIMETHYLAMINE |
| N,N-DIMETHYLALLYAMINE |
| 3-Dimethylamino-1-propene,N-Allyl-dimethylamin,DMAA |
