2-Methyl-2-butanol CAS 75-85-4
Introduction：Basic information about 2-Methyl-2-butanol CAS 75-85-4, including its chemical name, molecular formula, synonyms, physicochemical properties, and safety information, etc.
2-Methyl-2-butanol Basic information
| Product Name: | 2-Methyl-2-butanol |
| Synonyms: | 2-methyl-2-butano;2-methyl-2-butanol (tert-amyl alcohol);2-methylbutanol-2;3-Methylbutan-3-ol;3-Methyl-butanol-(3);Amylenhydrate;C2H5C(CH3)2OH;Methyl-2 butanol-2 |
| CAS: | 75-85-4 |
| MF: | C5H12O |
| MW: | 88.15 |
| EINECS: | 200-908-9 |
| Product Categories: | Organics |
| Mol File: | 75-85-4.mol |
2-Methyl-2-butanol Chemical Properties
| Melting point | -12 °C |
| Boiling point | 102 °C(lit.) |
| density | 0.805 g/mL at 25 °C(lit.) |
| vapor density | 3 (vs air) |
| vapor pressure | 15.5 hPa (20 °C) |
| refractive index | n |
| Fp | 20 °C |
| storage temp. | Store at +5°C to +30°C. |
| solubility | Miscible with alcohol, ether, benzene, chloroform, glycerol, oils and acetone. |
| pka | 15.38±0.29(Predicted) |
| form | Liquid |
| color | Clear colorless |
| PH | 6.0 (118g/l, H2O, 20℃)neutral |
| Odor | pungent |
| Odor Threshold | 0.088ppm |
| explosive limit | 1.3-9.6%(V) |
| Water Solubility | 120 g/L (20 ºC) |
| Merck | 14,7140 |
| BRN | 1361351 |
| Dielectric constant | 11.7（20℃） |
| Stability: | Light sensitive. Highly flammable. Incompatible with strong oxidizing agents. |
| InChI | 1S/C5H12O/c1-4-5(2,3)6/h6H,4H2,1-3H3 |
| InChIKey | MSXVEPNJUHWQHW-UHFFFAOYSA-N |
| SMILES | CCC(C)(C)O |
| LogP | 0.890 |
| Surface tension | 24.04mN/m at 293.15K |
| CAS DataBase Reference | 75-85-4(CAS DataBase Reference) |
| NIST Chemistry Reference | 2-Butanol, 2-methyl-(75-85-4) |
| EPA Substance Registry System | 2-Methyl-2-butanol (75-85-4) |
Safety Information
| Hazard Codes | F,Xn |
| Risk Statements | 11-20-37/38-41-21 |
| Safety Statements | 46-39-36/37-26 |
| OEB | A |
| OEL | TWA: 100.0 ppm; 360.0 mg/m3, STEL: 125.0 ppm; 450.0 mg/m3 |
| RIDADR | UN 1105 3/PG 2 |
| WGK Germany | 1 |
| RTECS | SC0175000 |
| Autoignition Temperature | 819 °F |
| TSCA | TSCA listed |
| HazardClass | 3 |
| PackingGroup | II |
| HS Code | 29051500 |
| Storage Class | 3 - Flammable liquids |
| Hazard Classifications | Acute Tox. 4 Dermal Acute Tox. 4 Inhalation Eye Dam. 1 Flam. Liq. 2 Skin Irrit. 2 STOT SE 3 |
| Hazardous Substances Data | 75-85-4(Hazardous Substances Data) |
| Toxicity | LD50 orally in rats: 1.0 g/kg (Schaffarzick, Brown) |
| Chemical Properties | colourless liquid with a camphor-like odour |
| Chemical Properties | Amyl alcohol is produced during the fermentation of grains, potatoes, and beets. It is also produced during the acid hydrolysis of petroleum fraction. Amyl alcohol is widely used in industry. For example, in the manufacturing of lacquers, paints, varnishes, perfumes, pharmaceuticals, plastics, rubber, explosives, hydraulic fl uids, for the extraction of fats, is also used in the petroleum refi nery industries |
| Chemical Properties | Amyl alcohols (pentanols) have eight isomers.All are flammable, colorless liquids, except the isomer 2,2-dimethyl-1-propanol, which is a crystalline solid. |
| Chemical Properties | tert-Amyl alcohol is a volatile liquid.2-Methyl-2-butanol has a sour odor, a threshold value of8.2 mg/m3 (2.3 ppm), an absolute perception limit of0.04 ppm, and a 100% recognition level of 0.23 ppm . |
| Uses | 2-Methyl-2-butanol is used as a solvent in flavors, pharmaceuticals, corrosion inhibitors, resins, gums, coating materials and in organic synthesis. It acts as a frothing agent (ore flotation), surfactant (petroleum recovery) and stabilizing agent. Further, it is used in processing aids. |
| Uses | 2-Methyl-2-butanol has been used in evaluating esterification rate of natural antioxidants like cinnamic acid and ascorbic acid using HPLC. |
| Uses | Pharmaceutic aid (solvent). |
| Definition | ChEBI: A tertiary alcohol that is propan-1-ol in which both of the hydrogens at position 1 have been replaced by methyl groups. |
| Production Methods | tert-Amyl alcohol is prepared by hydrating 2-methyl-2-butenes. It can also be prepared by reducing pivalicacid. |
| General Description | A clear, colorless liquid with an odor of camphor. Flash point 70°F. Density 0.81 g / cm3. Slightly soluble in water. |
| Air & Water Reactions | Highly flammable. Slightly soluble in water. |
| Reactivity Profile | 2-Methyl-2-butanol attacks plastics [Handling Chemicals Safely 1980. p. 236]. Reacts violently with acetyl bromide [Merck 11th ed. 1989]. Mixtures of alcohols with concentrated sulfuric acid and strong hydrogen peroxide can cause explosions. Example: an explosion will occur if dimethylbenzylcarbinol is added to 90% hydrogen peroxide then acidified with concentrated sulfuric acid. Mixtures of ethyl alcohol with concentrated hydrogen peroxide form powerful explosives. Mixtures of hydrogen peroxide and 1-phenyl-2-methyl propyl alcohol tend to explode if acidified with 70% sulfuric acid [Chem. Eng. News 45(43):73 1967; J, Org. Chem. 28:1893 1963]. Alkyl hypochlorites are violently explosive. They are readily obtained by reacting hypochlorous acid and alcohols either in aqueous solution or mixed aqueous-carbon tetrachloride solutions. Chlorine plus alcohols would similarly yield alkyl hypochlorites. They decompose in the cold and explode on exposure to sunlight or heat. Tertiary hypochlorites are less unstable than secondary or primary hypochlorites [NFPA 491 M, 1991]. Base-catalysed reactions of isocyanates with alcohols should be carried out in inert solvents. Such reactions in the absence of solvents often occur with explosive violence [Wischmeyer 1969]. |
| Hazard | Flammable, dangerous fire risk. |
| Health Hazard | Inhalation of the vapors of amyl alcohol causes tearing, pain, redness, swelling, irritation of the mucous membrane of the eyes, nose, throat, and upper respiratory tract and of thskin. Acute and long-term exposure to amyl alcohol causes nausea, vomiting, headache, vertigo, and muscular weakness. Vomiting may cause aspiration into the lungs, resulting in chemical pneumonia. After a prolonged period of exposure to amyl alcohol, workers develop dizziness, double vision, shortness of breath, delirium, and related narcotic effects. In severe cases, inhalation leads to pulmonary edema, kidney injury, effects on the heart and becomes fatal.Occupational workers with pre-existing skin disorders, eye problems, or impaired liver, kidney, or respiratory function, may be more susceptible to the effects of amyl alcohol. |
| Health Hazard | Inhalation or contact with material may irritate or burn skin and eyes. Fire may produce irritating, corrosive and/or toxic gases. Vapors may cause dizziness or suffocation. Runoff from fire control may cause pollution. |
| Fire Hazard | HIGHLY FLAMMABLE: Will be easily ignited by heat, sparks or flames. Vapors may form explosive mixtures with air. Vapors may travel to source of ignition and flash back. Most vapors are heavier than air. They will spread along ground and collect in low or confined areas (sewers, basements, tanks). Vapor explosion hazard indoors, outdoors or in sewers. Runoff to sewer may create fire or explosion hazard. Containers may explode when heated. Many liquids are lighter than water. |
| Safety Profile | Moderately toxic to humans by an unspecified route. Moderately toxic experimentally by ingestion, intraperitoneal, subcutaneous, and rectal routes. Narcotic in high concentration. Flammable liquid when exposed to heat, flame, or oxiduing materials. Moderately explosive in the form of vapor when exposed to heat or flame. A hypnotic agent. When heated to decomposition it emits acrid smoke and irritating fumes. |
| Potential Exposure | (n-isomer); Suspected reprotoxic hazard,Primary irritant (w/o allergic reaction), (iso-, primary):Possible risk of forming tumors, Primary irritant (w/o allergicreaction), (sec-, active primary-, and other isomers)Primary irritant (w/o allergic reaction). Used as a solvent inorganic synthesis and synthetic flavoring, pharmaceuticals,corrosion inhibitors; making plastics and other chemicals;as a flotation agent. The (n-isomer) is used in preparationof oil additives, plasticizers, synthetic lubricants, and as asolvent. |
| Shipping | UN2811 Pentanols, Hazard Class: 3; Labels: 3-Flammable liquid. UN1987 Alcohols, n.o.s., Hazard Class:3; Labels: 3-Flammable liquid. |
| Purification Methods | Reflux it with K2CO3, CaH2, CaO or sodium, then fractionally distil. The near-dry alcohol is further dried by refluxing with Mg activated with iodine, as described for ethanol. Further purification is possible using fractional crystallisation and zone refining at <-10o or preparative gas chromatography. [Beilstein 1 IV 1668.] |
| Incompatibilities | Forms an explosive mixture with air.Contact with strong oxidizers and hydrogen trisulfide maycause fire and explosions. Incompatible with strong acids.Violent reaction with alkaline earth metals forming hydrogen,a flammable gas. |
| Waste Disposal | Dissolve or mix the materialwith a combustible solvent and burn in a chemical incineratorequipped with an afterburner and scrubber. All federal,state, and local environmental regulations must beobserved. |
| Precautions | During handling and use of amyl alcohol, persons with pre-existing skin disorders, eye problems, or impaired liver, kidney, or respiratory function, should be careful since these workers/persons are more susceptible to the effects of amyl alcohol |
2-Methyl-2-butanol Preparation Products And Raw materials
| Raw materials | Acetone-->Ammonia-->Pentane-->Calcium carbide-->Acetylene-->3-Methyl-1-butene-->Sodium oleate-->1-Chloropentane-->AlcoholMixture-->3-Methyl butynol-->Hydrogenation reactor |
| Preparation Products | Triadimefon-->Pinacolone-->pinacolone，tert-butyl methy1 ketone，3，3-dimethyl-2-butyl ketone-->3-Methyl-2-butanone-->(1,1-DIMETHYL-PROPYL)-HYDRAZINE-->tert-Amylbenzene-->2,2-Dimethylbutyric acid-->1,1,2,3,3-pentamethylindan-->2-METHYL-2-BUTANETHIOL-->1,1-DIMETHYLPROPYL ETHYL ETHER-->2,5-Di(tert-amyl)hydroquinone |
