Acenaphthylene CAS 208-96-8
Introduction：Basic information about Acenaphthylene CAS 208-96-8, including its chemical name, molecular formula, synonyms, physicochemical properties, and safety information, etc.
Acenaphthylene Basic information
| Product Name: | Acenaphthylene |
| Synonyms: | cyclopenta(de)naphthalene;Cyclopenta[de]naphthalene;acenaphthylene anion radical;1,2-dihydroacenaphthylene-1,2-diide;ACENAPHTHALENE;ACENAPHTHYLENE;acenaphthylene,industrial;Acenaphthylene Standard |
| CAS: | 208-96-8 |
| MF: | C12H8 |
| MW: | 152.19 |
| EINECS: | 205-917-1 |
| Product Categories: | Aromatics;Mutagenesis Research Chemicals;Building Blocks;Chemical Synthesis;Organic Building Blocks;Industrial/Fine Chemicals;AA to ALAnalytical Standards;A;A-BAlphabetic;Alpha Sort;AromaticsChemical Class;Chemical Class;Hydrocarbons;NeatsAnalytical Standards;PAHs;Volatiles/ Semivolatiles;Arenes;Building Blocks;Organic Building Blocks;Naphthalenes;AA to AL;Alphabetic;PAH |
| Mol File: | 208-96-8.mol |
Acenaphthylene Chemical Properties
| Melting point | 78-82 °C(lit.) |
| Boiling point | 280 °C(lit.) |
| density | 0.899 g/mL at 25 °C(lit.) |
| vapor pressure | 6.68 at 25 °C (gas saturation-HPLC/UV spectrophotometry, Sonnefeld et al., 1983) |
| refractive index | 1.6360 (estimate) |
| Fp | 122°C |
| storage temp. | room temp |
| solubility | Soluble in ethanol, ether, and benzene (U.S. EPA, 1985) |
| form | Solid |
| color | Yellow |
| Specific Gravity | 0.899 |
| Water Solubility | 3.93mg/L(25 ºC) |
| BRN | 774092 |
| Henry's Law Constant | 1.14 at 25 °C (gas stripping-UV spectrophotometry, Warner et al., 1987) |
| Stability: | Stable. Incompatible with oxidizing agents. |
| Major Application | environmental |
| InChI | 1S/C12H8/c1-3-9-4-2-6-11-8-7-10(5-1)12(9)11/h1-8H |
| InChIKey | HXGDTGSAIMULJN-UHFFFAOYSA-N |
| SMILES | c1cc2C=Cc3cccc(c1)c23 |
| CAS DataBase Reference | 208-96-8(CAS DataBase Reference) |
| EPA Substance Registry System | Acenaphthylene (208-96-8) |
Safety Information
| Hazard Codes | Xn,N,F,T,Xi |
| Risk Statements | 22-36/37/38-67-65-50/53-38-11-39/23/24/25-23/24/25-20 |
| Safety Statements | 26-36/37/39-62-61-60-45-36/37-16-7-37/39-33-25-9 |
| RIDADR | UN 1145 3/PG 2 |
| WGK Germany | 3 |
| RTECS | AB1254000 |
| TSCA | TSCA listed |
| HazardClass | 9 |
| HS Code | 29029090 |
| Storage Class | 11 - Combustible Solids |
| Hazard Classifications | Acute Tox. 4 Oral Eye Irrit. 2 Skin Irrit. 2 STOT SE 3 |
| Hazardous Substances Data | 208-96-8(Hazardous Substances Data) |
| Toxicity | LC50 (21-d) for Folsomia fimetaria 145 mg/kg (Sverdrup et al., 2002). |
| Description | Acenaphthylene is a polycyclic aromatic hydrocarbon (PAH) consisting of three fused aromatic rings. It is used in the production of plastics and serves as an intermediate in the manufacture of dyes, soaps, pigments, pharmaceuticals, insecticides, fungicides, herbicides, and plant growth regulators. It is also a precursor to naphthalic acids, naphthalic anhydride (which is used in pigment production), and can be utilized in the synthesis of resins. The largest emissions of PAHs originate from the incomplete combustion of organic matter during industrial processes and other human activities. Major sources include: (a) the processing of coal, crude oil, and natural gas; (b) coking, coal conversion, petroleum refining, and the production of carbon black, creosote, coal tar, and bitumen; (c) aluminum, iron, and steel production in plants and foundries; (d) heating in power plants and households, as well as cooking; (e) combustion of waste; (f) motor vehicle emissions; (g) environmental tobacco smoke. |
| Chemical Properties | Acenaphthylene is a flaky yellow crystalline powder that forms prismatic or plate-like crystals. It is freely soluble in organic solvents such as ethanol, methanol, propanol, diethyl ether, petroleum ether, and benzene, but insoluble in water. Additionally, it polymerizes in the presence of strong acids. |
| Physical properties | Colorless to white prisms or crystalline plates from alcohol with an odor similar to coal tar oraromatic hydrocarbons. |
| Uses | Polycyclic aromatic hydrocarbons as carcinogenic |
| Uses | Acenaphthylene has been used to investigate the photodimerization of acenaphthylene in micellar and hydrogel media. |
| Uses | Acenaphthylene may be used as an analytical reference standard for the determination of the analyte in water using ?gas chromatography-flame ionization detection (GC-FID). |
| Preparation | It can be produced industrially by catalytic gas-phase dehydrogenation of acenaphthene. |
| Definition | ChEBI: Acenaphthylene is a ortho- and peri-fused tricyclic hydrocarbon that occurs in coal tar. It is an ortho- and peri-fused polycyclic arene, a member of acenaphthylenes and an ortho- and peri-fused tricyclic hydrocarbon. |
| Synthesis Reference(s) | Journal of the American Chemical Society, 69, p. 1388, 1947 DOI: 10.1021/ja01198a044 The Journal of Organic Chemistry, 61, p. 324, 1996 DOI: 10.1021/jo951613a |
| General Description | Acenaphthylene is a colorless crystalline solid. Insoluble in water. Used in dye synthesis, insecticides, fungicides, and in the manufacture of plastics. |
| Air & Water Reactions | Insoluble in water. |
| Reactivity Profile | Vigorous reactions, sometimes amounting to explosions, can result from the contact between aromatic hydrocarbons, such as ACENAPHTHYLENE, and strong oxidizing agents. They can react exothermically with bases and with diazo compounds. Substitution at the benzene nucleus occurs by halogenation (acid catalyst), nitration, sulfonation, and the Friedel-Crafts reaction. |
| Health Hazard | Acenaphthene is irritating to the skin and mucous membranes of rabbits. Subchronic oral administration of acenaphthene adversely affected the kidneys, liver, blood, reproductive system, and lungs in experimental animals. In rats, prolonged inhalation of low doses caused pulmonary effects such as bronchitis, pneumonia, and desquamation of the bronchial and alveolar epithelium. |
| Health Hazard | Carcinogenic properties of this compound inanimals or humans are not known. Toxicitydata are not available. |
| Safety Profile | Moderately toxic by intraperitonealroute. Mutation data reported. When heated todecomposition it emits acrid smoke and irritating fumes. |
| Potential Exposure | PAHs are compounds containing multiple benzene rings and are also called polynuclear aromatic hydrocarbons. Acenaphthylene is an aromatic hydrocarbon used in coal tar processing, as a dye intermediate; making insecticides, fungicides, plastics. |
| Source | Detected in groundwater at a former coal gasification plant in Seattle, WA at concentrationsranging from nondetect (method detection limit 5 μg/L) to 250 μg/L (ASTR, 1995). Basedon laboratory analysis of 7 coal tar samples, acenaphthylene concentrations ranged from 260 to18,000 ppm (EPRI, 1990). Lee et al. (1992a) equilibrated 8 coal tars with distilled water at 25 °C.The maximum concentration of acenaphthylene observed in the aqueous phase was 0.5 mg/L. Acenaphthylene was detected in asphalt fumes at an average concentration of 6.93 ng/m3 (Wanget al., 2001). Detected in a distilled water-soluble fraction of used motor oil at concentrations ranging from4.5 to 4.6 μg/L (Chen et al., 1994). Acenaphthylene was detected in a diesel-powered medium duty truck exhaust at an emissionrate of 70.1 μg/km (Schauer et al., 1999). Acenaphthylene was also detected in soot generatedfrom underventilated combustion of natural gas doped with toluene (3 mole %) (Tolocka andMiller, 1995). Gas-phase tailpipe emission rates from gasoline-powered automobiles with and withoutcatalytic converters were 37.0 and 2,180 μg/km, respectively (Schauer et al., 2002).Nine commercially available creosote samples contained acenaphthylene at concentrationsranging from 7 to 3,700 mg/kg (Kohler et al., 2000). Schauer et al. (2001) measured organic compound emission rates for volatile organiccompounds, gas-phase semi-volatile organic compounds, and particle-phase organic compoundsfrom the residential (fireplace) combustion of pine, oak, and eucalyptus. The gas-phase emissionrates of acenaphthylene were 18.6 mg/kg of pine burned, 10.8 mg/kg of oak burned, and 9.99mg/kg of eucalyptus burned. |
| Environmental fate | Biological. When acenaphthylene was statically incubated in the dark at 25 °C with yeastextract and settled domestic wastewater inoculum, significant biodegradation with rapidadaptation was observed. At concentrations of 5 and 10 mg/L, 100 and 94% biodegradation,respectively, were observed after 7 d (Tabak et al., 1981). A Beijerinckia sp. and a mutant strainwere able to cooxidize acenaphthylene to the following metabolites: acenaphthenequinone and acompound tentatively identified as 1,2-dihydroxyacenaphthylene. When acenaphthylene wasincubated with a mutant strain (Beijerinckia sp. strain B8/36) one metabolite formed which wastentatively identified as cis-1,2-acenaphthenediol (Schocken and Gibson, 1984). This compoundalso formed when acenaphthylene was deoxygenated by a recombinant strain of Pseudomonasaeruginosa PAO1(pRE695) (Selifonov et al., 1996). Bossert and Bartha (1986) reported that acenaphthylene in a Nixon sandy loam soil (1g/kg) completely disappeared in <4 months. They concluded volatilization was more importantthan biodegradation in the disappearance of acenaphthylene from soil. Ozonation in water at 60 °C produced 1,8-naphthalene dialdehyde, 1,8-naphthalene anhydride, 1,2-epoxyacenaphthylene, 1-naphthoic acid, and 1,8-naphthaldehydic acid(Calvert and Pitts, 1966). |
| Shipping | UN3143 Dye intermediates, solid, toxic, Hazard Class: 6.1; Labels: 6.1-Poisonous material, Hazard, Technical Name Required. UN3077 Environmentally hazardous substances, solid, n.o.s., Hazard class: 9; Labels: 9-Miscellaneous hazardous material, Technical Name Required. |
| Purification Methods | Dissolve acenaphthylene in warm redistilled MeOH, filter through a sintered glass funnel and cool to -78o to precipitate the material as yellow plates [Dainton et al. Trans Faraday Soc 56 1784 1960]. Alternatively it can be sublimed in vacuo. [Beilstein 5 H 625, 5 IV 2138.] |
| Incompatibilities | Keep away from ozone and strong oxidizing agents. Incompatible with oxidizers (chlorates, nitrates, peroxides, permanganates, perchlorates, chlorine, bromine, fluorine, etc.); contact may cause fires or explosions. Keep away from alkaline materials, strong bases, strong acids, oxoacids, epoxides |
| Toxics Screening Level | The Initial Threshold Screening Level (ITSL) for acenaphthylene is 35 μg/m3, with annualaveraging time. |
| Waste Disposal | Consult with environmental regulatory agencies for guidance on acceptable disposal practices. Generators of waste containing this contaminant (≥100 kg/mo) must conform with EPA regulations governing storage, transportation, treatment, and waste disposal. Product residues and sorbent media may be packaged in epoxy-lined drums, then destroyed by incineration, permanganate oxidation or microwave plasma treatment. The United States Environmental Protection Agency has investigated chemical precipitation for wastewater treatment |
| References | [1] Schmidt R et al; Hydrocarbons. Ullmann's Encyclopedia of Industrial Chemistry 7th ed. (1999-2016). NY, NY: John Wiley & Sons. Online Posting Date: November 24, 2014 [2] YUXUAN DAI . Photodegradation of acenaphthylene over plasmonic Ag/Ag3PO4 nanopolyhedrons synthesized via in-situ reduction[J]. Applied Surface Science, 2022, 572: Article 151421. DOI:10.1016/j.apsusc.2021.151421. |
Acenaphthylene Preparation Products And Raw materials
| Raw materials | Calcium oxide-->Potassium sulfate-->Polishing oil-->Acenaphthene-->Potassium chromate |
| Preparation Products | 4-AMINO-1,8-NAPHTHALIMIDE-->1-ACETOXYACENAPHTHENE-->3,4,9,10-Perylenetetracarboxylic dianhydride-->2a,3,4,5-Tetrahydroacenaphthene-->3,9-perylenedicarboxylic acid-->DECACYCLENE-->1-Acenaphthenone-->1-ACENAPHTHENOL-->1-nitroacenaphthlene-->Acenaphthylene, 5-nitro--->Acenaphthylene, 1,2-dihydro-1,2-dimethoxy- |
