Heptane CAS 142-82-5

Introduction:Basic information about Heptane CAS 142-82-5, including its chemical name, molecular formula, synonyms, physicochemical properties, and safety information, etc.

Heptane Basic information

Product Name:Heptane
Synonyms:Aliphatic hydrocarbon;Dipropylmethane;Eptani;Exxsol heptane;Gettysolve-C;Heptan;heptane(n-heptane);Heptanen
CAS:142-82-5
MF:C7H16
MW:100.2
EINECS:205-563-8
Product Categories:HPLC Solvents;n-Paraffins (GC Standard);Standard Materials for GC;Analytical Chemistry;Solvents for HPLC & Spectrophotometry;Solvents for Spectrophotometry;Composite Drums;ACS and Reagent Grade Solvents;Carbon Steel Cans with NPT Threads;Drums Product Line;Nutrition Research;Phytochemicals by Plant (Food/Spice/Herb);ReagentPlus;ReagentPlus Solvent Grade Products;Semi-Bulk Solvents;Solvent by Application;Zingiber officinale (Ginger);CHROMASOLV for HPLC;HPLC &HPLC Grade Solvents (CHROMASOLV);HPLC/UHPLC Solvents (CHROMASOLV);UHPLC Solvents (CHROMASOLV);Biotech Solvents;Sure/Seal Bottles;Anhydrous;Anhydrous Solvents;Products;Returnable Containers;Reagent;Chemical Class;CHROMASOLV Plus;HPLC Plus Grade Solvents (CHROMASOLV);NOWPak Products;VerSA-Flow Products;Biotech SolventsSolvents;Pesticide Residue Analysis (PRA) SolventsSolvent Bottles;PRA;Chromatography/CE Reagents;Pestanal/Residue Analysis;Solvents - GC/SH;Spectrophotometric Grade Solvents;Spectrophotometric GradeSolvents;Alpha Sort;Analytical Standards;Chromatography;E-L;Environmental Standards;Volatiles/ Semivolatiles;LC-MS Solvents;LC-MS Solvents &Reagents (CHROMASOLV);Chromatography Reagents &E-H;Amber Glass Bottles;Analytical Reagents;Analytical Reagents for General Use;Analytical/Chromatography;Heptane;Multi-Compendial;Puriss p.a.;Solvent Bottles;Solvent by Type;Solvent Packaging Options;HA -HT;Alpha Sort;E-LAlphabetic;HA -HT;Volatiles/ Semivolatiles;CHROMASOLV for HPLCSemi-Bulk Solvents;CHROMASOLV(R) for HPLCSolvents;NOWPak(R) Products;Semi-Bulk Solvents;VerSA-Flow? Products;Capillary GC Solvents;Alphabetic;H;HA -HTChemical Class;Hydrocarbons;Neats;Anhydrous Grade SolventsSolvents;AnhydrousSolvents;Returnable Container Solvents;Solvent Bottles;Solvents;Sure/Seal? Bottles;LC-MS Solvents;Mass Spectrometry (MS)&LC-MS;Spectroscopy;Amber Glass Bottles;CHROMASOLV for HPLCSolvents;CHROMASOLV Solvents (HPLC, LC-MS);CHROMASOLV(R) HPLC Grade Solvents;ReagentPlus(R)Drums Product Line;Carbon Steel Cans with NPT Threads;Composite Drums;ReagentPlus(R) Solvent Grade Products;ReagentPlus(R)Semi-Bulk Solvents;ReagentPlus(R)Solvents;CHROMASOLV PlusCHROMASOLV Solvents (HPLC, LC-MS);CHROMASOLV(R) Plus;LC-MS Plus and Gradient;Protein Sequencing;Protein Structural Analysis;Reagents for Protein Sequencing;E-H, Puriss p.a.;Puriss p.a.;Analytical Reagents for General Use;Pharmaceutical Intermediates;abz;bc0001
Mol File:142-82-5.mol

Heptane Chemical Properties

Melting point −91 °C(lit.)
Boiling point 98 °C(lit.)
density 0.684 g/mL at 20 °C
vapor density 3.5 (vs air)
vapor pressure 40 mm Hg ( 20 °C)
refractive index n20/D 1.397
Fp 30 °F
storage temp. Store at +5°C to +30°C.
solubility acetone: miscible(lit.)
pka>14 (Schwarzenbach et al., 1993)
form Liquid
color ≤10(APHA)
Specific Gravity0.684 (20/4℃)
Relative polarity0.012
OdorGasoline.
Odor Threshold0.67ppm
explosive limit1-7%(V)
Water Solubility practically insoluble
λmaxλ: 200 nm Amax: ≤1.0
λ: 225 nm Amax: ≤0.10
λ: 250 nm Amax: ≤0.01
λ: 300-400 nm Amax: ≤0.005
Merck 14,4659
BRN 1730763
Henry's Law Constant0.901, 1.195, and 1.905(atm?m3/mol) at 26.0, 35.8, and 45.0 °C, respectively (dynamic headspace, Hansen et al.,1995)
Exposure limitsNIOSH REL: TWA 85 ppm (350 mg/m3), 15-min ceiling 440 ppm (1,800mg/m3), IDLH 750 ppm; OSHA PEL: TWA 500 ppm (2,000 mg/m3); ACGIH TLV: TWA 400ppm, STEL 500 ppm (adopted).
Dielectric constant1.9(20℃)
Stability:Stable. Incompatible with oxidizing agents, chlorine, phosphorus. Highly flammable. Readily forms explosive mixtures with air.
Major Applicationmicrobiology
Cosmetics Ingredients FunctionsSOLVENT
InChI1S/C7H16/c1-3-5-7-6-4-2/h3-7H2,1-2H3
InChIKeyIMNFDUFMRHMDMM-UHFFFAOYSA-N
SMILESCCCCCCC
LogP4.660
Surface tension21.12mN/m at 293.15K
CAS DataBase Reference142-82-5(CAS DataBase Reference)
NIST Chemistry ReferenceHeptane(142-82-5)
EPA Substance Registry SystemHeptane (142-82-5)
Absorption0.10 at 225nm
0.40 at 210nm
1.0 at 197nm

Safety Information

Hazard Codes F,Xn,N
Risk Statements 11-38-50/53-65-67
Safety Statements 9-16-29-33-60-61-62-23
RIDADR UN 1206 3/PG 2
OEBA
OELTWA: 85 ppm (350 mg/m3), Ceiling: 440 ppm (1800 mg/m3) [15-minute]
WGK Germany 3
RTECS MI7700000
3-10
Autoignition Temperature433 °F
TSCA TSCA listed
HazardClass 3
PackingGroup II
HS Code 29011000
Storage Class3 - Flammable liquids
Hazard ClassificationsAquatic Acute 1
Aquatic Chronic 1
Asp. Tox. 1
Flam. Liq. 2
Skin Irrit. 2
STOT SE 3
Hazardous Substances Data142-82-5(Hazardous Substances Data)
ToxicityLC (2 hr in air) in mice: 75 mg/l (Lazarew)
IDLA750 ppm

Heptane Usage And Synthesis

Descriptionn-Heptane is a clear liquid which is highlyflammable and volatile with a mild, gasoline-like odor. Theodor threshold is 40- 547 ppm; also reported at 230 ppm.Molecular weight = 100.23; Specific gravity (H2O:l)= 0.68;Boiling point = 98.39C; FreezingMelting point= - 90.6℃;Vapor pressure = 40 mmHg at 25℃; Flash point= 一4℃;Autoignition temperature = 204℃.285℃. Explosivelimits:LEL= 1.1%; UEL= 6.7%.Hazard Identification(basedonNFPA-704 M Rating System): Health 1,Flammability 3, Reactivity 0. Practically insoluble in water;solubility = 0.0003%.
Chemical Propertiesn-Heptane is a flammable liquid, present in crude oil and widely used in the auto-mobile industry. For example, as a solvent, as a gasoline knock testing standard, asautomotive starter fl uid, and paraffi nic naphtha. n-Heptane causes adverse healtheffects in occupational workers, such as CNS depression, skin irritation, and pain.Other compounds such as n-octane (CH 3 (CH 2 ) 6 CH 3 ), n-nonane (CH 3 (CH 2 ) 7 CH 3 ), andn-decane (CH 3 (CH 2 ) 8 CH 3 ) have different industrial applications. Occupational workersexposed to these compounds also show adverse health effects. In principle, manage-ment of these aliphatic compounds requires proper handling and disposal to avoidhealth problems and to maintain chemical safety standards for safety to workers andthe living environment.
Chemical Propertiesn-Heptane is a clear liquid which is highlyflammable and volatile with a mild, gasoline-like odor.The odor threshold is 40 547 ppm; also reported @230 ppm.
Physical propertiesClear, colorless, very flammable liquid with a faint, pleasant odor resembling hexane or octane.Based on a triangle bag odor method, an odor threshold concentration of 670 ppbv was reported byNagata and Takeuchi (1990).
UsesSuitable for HPLC, spectrophotometry, environmental testing
UsesAs standard in testing knock of gasoline engines.
Usesheptane is a solvent and viscosity-decreasing agent.
DefinitionA colorlessliquid alkane obtained from petroleum refining.It is used as a solvent.
Definitionheptane: A liquid straight-chainalkane obtained from petroleum,C7H16; r.d. 0.684; m.p. -90.6°C; b.p.98.4°C. In standardizing octanenumbers, heptane is given a valuezero.
Production MethodsHeptane is produced in refining processes. Highly purifiedheptane is produced by adsorption of commercial heptane onmolecular sieves.
Synthesis Reference(s)Tetrahedron Letters, 3, p. 43, 1962 DOI: 10.1007/BF01499754
General DescriptionClear colorless liquids with a petroleum-like odor. Flash point 25°F. Less dense than water and insoluble in water. Vapors heavier than air.
Air & Water ReactionsHighly flammable. Insoluble in water.
Reactivity ProfileHEPTANE is incompatible with the following: Strong oxidizers .
HazardToxic by inhalation. Flammable, dangerousfire risk.
Health HazardVAPOR: Not irritating to eyes, nose or throat. If inhaled, will cause coughing or difficult breathing. LIQUID: Irritating to skin and eyes. If swallowed, will cause nausea or vomiting.
Fire HazardFLAMMABLE. Flashback along vapor trail may occur. Vapor may explode if ignited in an enclosed area.
Chemical ReactivityReactivity with Water No reaction; Reactivity with Common Materials: No reactions; Stability During Transport: Stable; Neutralizing Agents for Acids and Caustics: Not pertinent; Polymerization: Not pertinent; Inhibitor of Polymerization: Not pertinent.
Potential Exposuren-Heptane is used in graphics, textiles,adhesives, and coatings; as an industrial solvent and in thepetroleum refining process; as a standard in testing knockof gasoline engines.
First aidIf this chemical gets into the eyes,Iremove; anycontact lenses at once and irrigate immediately for at least 15 min, occasionally lifting upper and lower lids. Seek med-ical ;attention immediately. If this chemical contacts theskin, remove contaminated clothing and wash immediatelywith soap and water. Seek medical attention immediately. Ifthis chemical has been inhaled, remove from exposure,begin rescue breathing (using universal precautions, includ-ing resuscitation mask) if breathing has stopped and CPR ifheart action has stopped. Transfer promptly to a medicalfacility. When this chemical has been swallowed, get medi-cal attention. Give large quantities of water and induce :vomiting. Do not make an unconscious person vomit.
SourceSchauer et al. (1999) reported heptane in a diesel-powered medium-duty truck exhaust atan emission rate of 470 g/km.
Identified as one of 140 volatile constituents in used soybean oils collected from a processingplant that fried various beef, chicken, and veal products (Takeoka et al., 1996).
Schauer et al. (2001) measured organic compound emission rates for volatile organiccompounds, gas-phase semi-volatile organic compounds, and particle-phase organic compoundsfrom the residential (fireplace) combustion of pine, oak, and eucalyptus. The gas-phase emissionrate of heptane was 28.9 mg/kg of pine burned. Emission rates of heptane were not measuredduring the combustion of oak and eucalyptus.
California Phase II reformulated gasoline contained heptane at a concentration of 9,700 mg/kg.
Gas-phase tailpipe emission rates from gasoline-powered automobiles with and without catalyticconverters were 1.82 and 268 mg/km, respectively (Schauer et al., 2002).
Environmental fateBiological. Heptane may biodegrade in two ways. The first is the formation of heptylhydroperoxide, which decomposes to 1-heptanol followed by oxidation to heptanoic acid. Theother pathway involves dehydrogenation to 1-heptene, which may react with water forming 1-heptanol (Dugan, 1972). Microorganisms can oxidize alkanes under aerobic conditions (Singerand Finnerty, 1984). The most common degradative pathway involves the oxidation of theterminal methyl group forming the corresponding alcohol (1-heptanol). The alcohol may undergoa series of dehydrogenation steps forming heptanal followed by oxidation forming heptanoic acid.The acid may then be metabolized by β-oxidation to form the mineralization products, carbondioxide and water (Singer and Finnerty, 1984). Hou (1982) reported hexanoic acid as adegradation product by the microorganism Pseudomonas aeruginosa.
Photolytic. The following rate constants were reported for the reaction of hexane and OHradicals in the atmosphere: 7.15 x 10-12 cm3/molecule?sec (Atkinson, 1990). Photooxidationreaction rate constants of 7.19 x 10-12 and 1.36 x 10-16 cm3/molecule?sec were reported for thereaction of heptane with OH and NO3, respectively (Sablji? and Güsten, 1990). Based on aphotooxidation rate constant 7.15 x 10-12 cm3/molecule?sec for heptane and OH radicals, theestimated atmospheric lifetime is 19 h in summer sunlight (Altshuller, 1991).
Chemical/Physical. Complete combustion in air yields carbon dioxide and water vapor. Heptanewill not hydrolyze because it has no hydrolyzable functional group.
storageColor Code- _Red: Flammability Hazard: Store ina flammable liquid storage area or approved cabinet awayfrom ignition sources and corrosive and reactive materials.Prior to working with heptane you should be trained on itsproper handling and storage. Before entering confined spacewhere heptane may be present, check to make sure that anexplosive concentration does not exist. Store in tightlyclosed containers in a cool, well-ventilated area. Metalcontainers involving the transfer of this chemical should be grounded and bonded. Where possible, automatically pumpliquid from drums or other storage containers to processcontainers.Drums must be equipped with self-closingvalves, pressure vacuum bungs, and flame arresters. Useonly nonsparking tools and equipment, especially whenopening and closing containers of this chemical. Sources ofignition, such as smoking and open flames, are prohibitedwhere this chemical is used, handled, or stored in a mannerthat could create a potential fire or explosion hazard.Wherever this chemical is used, handled, manufactured, orstored, use explosion-proof electrical equipment and fittings.
ShippingUN1206 Heptanes, Hazard Class: 3; Labels:3-Flammable liquid.
Toxicity evaluationThe acute mechanism of toxicity is suspected be similar to othersolvents that rapidly induce anesthesia-like effects, i.e.,a ‘nonspecific narcosis’ because of disruption (solvation) of theintegrity of the cellular membranes of the central nervoussystem (CNS). This disruptive narcosis may also contribute tothe pathology seen with chronic toxicity, although the gammadiketone metabolite of n-heptane would be responsible for anydelayed peripheral neurotoxicity seen in humans followingchronic exposure, similar to the mechanism seen for hexane.Although the mechanism of toxicity of n-heptane, with respectto polyneuropathy, is believed to be similar to hexane, humanexposures in the workplace are often a mixture of other solventsand the animal data are not compelling.
Heptane is generally considered to be less toxic than hexanebut slightly more toxic than octane. This is probably because itis less volatile than the former but more volatile than the latter(consistent with the nonspecific narcotic mechanism of toxicityof volatile organic compounds). If it is aspirated into the lungs,however, n-heptane will cause adverse effects similar to thoseseen with petroleum distillates.
IncompatibilitiesMay form explosive mixture with air.Strong oxidizers may cause fire and explosions. Attackssome plastics, rubber and coatings. May accumulate staticelectric charges that can ignite its vapors.
Toxics Screening LevelThe initial threshold screening level for heptane is 3500 μg/m3 based on an 8-hour averaging time.
Waste DisposalDissolve or mix the materialwith a combustible solvent and burn in a chemical incinera tor equipped with an afterburner and scrubber. All federal,state, and local environmental regulations must be observed.

Heptane Preparation Products And Raw materials

Raw materialsMethylcyclohexane-->Alkanes C6-C19 Kit-->CIS-1,3-DIMETHYLCYCLOPENTANE-->3-ETHYLPENTANE
Preparation ProductsFenvalerate-->Ethacrynic acid-->Tetrahydro-4H-pyran-4-one-->6-FLUORO-1H-PYRAZOLO[3,4-B]PYRIDINE-3-CARBONITRILE-->2-CHLORO-5-FLUOROISONICOTINIC ACID-->8-Aminoisoquinoline-->5-Amino-2-chloropyrimidine-->2-(AMINOMETHYL)CYCLOPROPANECARBOXYLIC ACID-->4'-FORMYLBENZO-15-CROWN 5-ETHER-->6-FLUORO-1H-PYRAZOLO[3,4-B]PYRIDINE-3-CARBOXYLIC ACID-->1-Methyl-1H-imidazole-2-carboxylic acid-->Fenpropathrin-->4,6-Dimethylpyrimidine-5-carboxylic acid-->(2-METHOXY-1-METHYL-ETHYL)-HYDRAZINE-->4,6-Diamino-2-pyrimidinol-->1-Nonanol-->2-Chloro-5-nitropyrimidine-->N-(2-Amino-4,6-dichloro-5-pyrimidinyl)formamide-->3-ISOPROPOXYPHENYLBORONIC ACID-->Methyl 2,4-dichloropyrimidine-6-carboxylate-->2,4,6-TRICHLOROPYRIMIDIN-5-AMINE-->4-bromo-1-(bromomethyl)-2-(4-chlorophenyl)-5-(trifluoromethyl)-1H-pyrrole-3-carbonitrile-->2,4,6-TRICHLORO-5-NITROPYRIMIDINE-->2-(4-chlorophenyl)-1-methyl-5-(trifluoromethyl)-1H-pyrrole-3-carbonitrile-->5-Nitro-2-pyrimidinol sodium salt ,97%-->2-(4-CHLOROPHENYL)-4-BROMO-1-METHYL-5-(TRIFLUOROMETHYL)-1H-PYRROLE-3-CARBONITRILE-->Trifluoromethanesulfonic acid tert-butyldimethylsilyl ester-->Ziegler catalyst、Phillips catalyst-->2-Chloro-5-fluoropyridine-->Tetrabenzyl pyrophosphate-->Phenylsulfenylchloride-->titanium trichloride/aluminum dialkyl chloride
Heptamethyldisilazane CAS 920-68-3
Heptanoic acid CAS 111-14-8
Recommended......
TOP