Polyethylene glycol monooleate CAS 9004-96-0

Introduction:Basic information about Polyethylene glycol monooleate CAS 9004-96-0, including its chemical name, molecular formula, synonyms, physicochemical properties, and safety information, etc.

Polyethylene glycol monooleate Basic information

Product Name:Polyethylene glycol monooleate
Synonyms:nonisol200;nopalcol1-0;Poly(oxy-1,2-ethanediyl), .alpha.-[(9Z)-1-oxo-9-octadecen-1-yl]-. omega.-hydroxy-;PEG-8 OLEATE;PEG-9 OLEATE;PEG-10 OLEATE;PEG-11 OLEATE;PEG-12 OLEATE
CAS:9004-96-0
MF:(C2H4O)nC18H34O2
MW:0
EINECS:500-015-7
Product Categories:Plasticizers;Polymer Additives;Polymer Science
Mol File:9004-96-0.mol

Polyethylene glycol monooleate Chemical Properties

Boiling point >260 °C(lit.)
density 1.034 g/mL at 25 °C
refractive index n20/D 1.468
Fp 113 °C
storage temp. Amber Vial, Refrigerator
solubility toluene, ethanol and acetone: soluble (dispersible in water)
form Oil
color Colourless to Light Beige
Water Solubility toluene, ethanol and acetone: soluble (dispersible in water)
Hydrophilic-Lipophilic Balance (HLB)15.1
Stability:Light Sensitive
Cosmetics Ingredients FunctionsSURFACTANT - EMULSIFYING
SURFACTANT - CLEANSING
InChIInChI=1S/C20H38O3/c1-2-3-4-5-6-7-8-9-10-11-12-13-14-15-16-17-20(22)23-19-18-21/h9-10,21H,2-8,11-19H2,1H3
InChIKeyMUHFRORXWCGZGE-UHFFFAOYSA-N
SMILESC(CC(=O)O{-}CC{+n}O)CCCCCC=CCCCCCCCC
LogP7.185 (est)
EPA Substance Registry SystemPolyethylene glycol monooleate (9004-96-0)

Safety Information

WGK Germany 1
RTECS MD0880000
TSCA TSCA listed
HS Code 3907990100
Storage Class11 - Combustible Solids
ToxicityLD50 oral in mouse: > 25gm/kg

Polyethylene glycol monooleate Usage And Synthesis

Chemical PropertiesLiquid
UsesPegosperse(R) 200 MO is used as an emulsifier for personal care and water treatment and as a processing aid in textile industry.
UsesPegosperse(R) 600 MO is used as an emulsifier for personal care and water treatment and as a processing aid in textile industry.
UsesPegosperse(R) 400 MO is a mid-range HLB, surface active agent suggested for use in animal feed (emulsifier), cosmetics (emulsifier), textile chemicals (emulsifier, lubricant, softener, scouring agent), coatings (emulsifier) and industrial degreasers.
SynthesisPut 300.0g of oleic acid and 1.68g of catalyst (composed of tetramethyl ammonium chloride and CoO, the mass ratio of tetramethyl ammonium chloride to CoO was 1:0.25) into a 2L reactor with stirring, electric heating jacket and internal water-cooling coil, and seal the reactor. Nitrogen was replaced with nitrogen in the reactor three times, stirring was turned on, the temperature was raised to 90 ?? at a pressure of -0.09 MPa for vacuum treatment for 60 min, then the temperature was raised to 140 ?? and maintained at this temperature, ethylene oxide was passed through, and the reaction pressure was maintained at 0.3 MPa by controlling the rate of passage of ethylene oxide, and the passage of ethylene oxide was stopped when the total amount of ethylene oxide passed through was 373.8 g. The reaction was carried out at 140 ?? for ripening The reaction was carried out until the pressure no longer decreased (indicating that the ripening reaction had been completed), and vacuum treatment was carried out at a pressure of -0.09 MPa for 30 min, and then the temperature was lowered to 40?? C. to obtain a fatty acid polyoxyethylene ester product.

Polyethylene glycol monooleate Preparation Products And Raw materials

Raw materialsETHYLENE OXIDE-->Oleic acid
Preparation ProductsLevelling agent GS
Polyethylene glycol monomethyl ether tosylate CAS 58320-73-3
POLYETHYLENE GLYCOL MONOOLEYL ETHER CAS 9004-98-2
Recommended......
TOP