Glutaraldehyde CAS 111-30-8
Introduction：Basic information about Glutaraldehyde CAS 111-30-8, including its chemical name, molecular formula, synonyms, physicochemical properties, and safety information, etc.
Glutaraldehyde Basic information
| Product Name: | Glutaraldehyde |
| Synonyms: | GLUTARDIALDEHYDE SOLUTION 25% FOR ELECTR;PENTANDIAL;Glutaraldehyde 25 % solution in water;Glutaraldehyde 50 % solution in water;Glutaraldehyde 8 % solution in water;glutaric dialdehyde solution;GLUTARICDIALDEHYDE,50%INWATER;Glutaraldehybe Soution |
| CAS: | 111-30-8 |
| MF: | C5H8O2 |
| MW: | 100.12 |
| EINECS: | 203-856-5 |
| Product Categories: | Fine Chemicals;Carbohydrates A to Z;Carbohydrates G;Aldehydes;Biochemicals and Reagents;Building Blocks;C1 to C6;Carbohydrates;Carbonyl Compounds;Chemical Synthesis;Core Bioreagents;Monosaccharide;Organic Building Blocks;Research Essentials;&Buffers;Buffers and Reagents;Protein Electrophoresis;Proteomics;Reagents;Routine Histology Stains;Hematology and Histology;Fixatives;Life Science Reagents for Immunohistochemistry (IHC);Tissue Processing;General Reagents;Life Science Reagents for Cell Culture;Life Science Reagents for Protein Electrophoresis;Life Science Reagents for Transfection;Life Science Reagents for Western Blotting;Pharmaceutical Intermediates;INORGANIC & ORGANIC CHEMICALS;Biocide;Alphabetical Listings;Flavors and Fragrances;G-H;Stains;Western Blotting;Chemical raw materials;111-30-8 |
| Mol File: | 111-30-8.mol |
Glutaraldehyde Chemical Properties
| Melting point | -15 °C |
| Boiling point | 100 °C |
| density | 1.058 g/mL at 20 °C |
| vapor density | 1.05 (vs air) |
| vapor pressure | 15 mmHg ( 20 °C) |
| refractive index | n |
| Fp | 100°C |
| storage temp. | Store below +30°C. |
| solubility | Chloroform (Slightly), DMSO (Slightly), Ethyl Acetate (Slightly), Methanol (Slightly) |
| form | Solution |
| color | Clear to slight haze |
| Specific Gravity | 1.06 |
| Odor | pungent aldehyde odor |
| PH | >3.0 (H2O, 20°C) |
| biological source | synthetic |
| Water Solubility | miscible |
| Merck | 14,4472 |
| BRN | 605390 |
| Exposure limits | Ceiling (ACGIH) 0.8 mg/m3 (0.2 ppm). |
| Stability: | Light Sensitive |
| Cosmetics Ingredients Functions | FRAGRANCE PRESERVATIVE |
| Cosmetic Ingredient Review (CIR) | Glutaraldehyde (111-30-8) |
| InChI | 1S/C5H8O2/c6-4-2-1-3-5-7/h4-5H,1-3H2 |
| InChIKey | SXRSQZLOMIGNAQ-UHFFFAOYSA-N |
| SMILES | [H]C(CCCC([H])=O)=O |
| LogP | -0.180 (est) |
| CAS DataBase Reference | 111-30-8(CAS DataBase Reference) |
| NIST Chemistry Reference | Glutaral(111-30-8) |
| EPA Substance Registry System | Glutaraldehyde (111-30-8) |
Safety Information
| Hazard Codes | T,N,Xn |
| Risk Statements | 36/37/38-42/43-34-23-22-50-23/25-41-37/38-20/22 |
| Safety Statements | 23-26-36/37-45-36/37/39-61 |
| RIDADR | UN 2922 8/PG 2 |
| OEL | Ceiling: 0.2 ppm (0.8 mg/m3) (Aldehydes) |
| WGK Germany | 3 |
| RTECS | MA2450000 |
| F | 8-10-23 |
| Autoignition Temperature | 395°C |
| TSCA | TSCA listed |
| HazardClass | 8 |
| PackingGroup | II |
| HS Code | 29121900 |
| Storage Class | 6.1C - Combustible acute toxic Cat.3 toxic compounds or compounds which causing chronic effects |
| Hazard Classifications | Acute Tox. 4 Inhalation Acute Tox. 4 Oral Aquatic Chronic 3 Eye Dam. 1 Repr. 1B Resp. Sens. 1 Skin Corr. 1B Skin Sens. 1 STOT SE 3 |
| Hazardous Substances Data | 111-30-8(Hazardous Substances Data) |
| Toxicity | LD50 of 25% soln orally in rats: 2.38 ml/kg; by skin penetration in rabbits: 2.56 ml/kg (Smyth) |
| Uses | As broad-spectrum antimicrobial cold sterilant/disinfectant for hospital equipment; as tanning agent for leather; as tissue fixative; as cross-linking agent for proteins; as preservative in cosmetics; as therapeutic agent for warts, hyperhidrosis, and dermal mycotic infections; in X ray processing solutions and film emulsion; as a disinfectant in the beauty industry |
| Description | Glutaraldehyde is a well-known sensitizer amongcleaners and health workers. It is also found in X-raydevelopers products. |
| Chemical Properties | Glutaraldehyde is a colorless liquid with a pungent odor, which readily changes to a glossy polymer. The Odor Threshold is 0.04 ppm (NY) and 0.2 ppm (NJ). It is miscible in water and organic solvents. Glutaraldehyde may be incompatible with strong oxidizers and strong bases. It should be noted that alkaline solutions containing glutaraldehyde may react with alcohol, ketones, amines, hydrazines, and proteins. |
| Uses | glutaral (glutardialdehyde) is a broad-spectrum preservative that can cause skin irritation. This is an amino acid occurring in green sugar beets. |
| Uses | Glutaraldehyde (Symbol GTA; glutaric dialdehyde, 1,5-pentanedial, glutaral) is commonly used in the medical industry in cold sterilization and in the X-ray development process. It can also be encountered in the leather industry as a tanning ingredient and in mortuary workers. There are no reports which indicate that glutaraldehyde is a naturally occurring compound. Cidex and Acusol, 2% buffered solutions, use this aldehyde as an active ingredient. Sodium bicarbonate is required to activate the solution, which then has a shelf life of 1–2 weeks. Despite health hazards involved with its use, glutaraldehyde is one of the most effective biocides used. It is particularly effective against bacteria and viruses, including the human immunodeficiency virus. |
| Uses | Glutaraldehyde is used to disinfect medical and dental equipment. Glutaraldehyde is also used for industrial water treatment and as a preservative. |
| Uses | Glutaraldehyde is used as a cold sterilizingdisinfectant, as fixatives for tissues, in tanning,and in cross-linking proteins. |
| Definition | ChEBI: A dialdehyde comprised of pentane with aldehyde functions at C-1 and C-5. |
| Synthesis Reference(s) | Tetrahedron, 48, p. 3503, 1992 DOI: 10.1016/S0040-4020(01)88489-1 |
| General Description | Light yellow liquid. Mixes with water. |
| Air & Water Reactions | Polymerizes in the presence of water. |
| Reactivity Profile | GLUTARALDEHYDE may discolor on exposure to air. Pentanedial polymerizes on heating. Pentanedial is incompatible with strong oxidizing agents. Pentanedial polymerizes in the presence of water. |
| Health Hazard | Glutaraldehyde is a strong irritant to the nose,eyes, and skin. In rabbits, 250 μg and 500 mg in 24 hours produced severe irritation in theeyes and skin, respectively. The corrosiveeffect on human skin of 6 mg over 3 dayswas severe. However, the acute toxicity ofglutaraldehyde by the oral and dermal routesis low to mild. Ohsumi and Kuroki (1988)determined that the symptoms of acute toxicityof this compound were less severethan those of formaldehyde. But the restraintof growth was more pronounced in micetreated with glutaraldehyde. An oral LD50value of 1300 mg/kg was reported for mice.Inhalation of this compound can cause upperrespiratory tract irritation, headache, and nervousness.Mice exposed at 33 ppm showedsymptoms of hepatitis. |
| Fire Hazard | Literature sources indicate that Pentanedial is nonflammable. |
| Flammability and Explosibility | Non flammable |
| Biochem/physiol Actions | Glutaraldehyde is an effective protein crosslinker and finds application in techniques like enzyme immobilisation microscopy, histochemistry and cytochemistry. It exists in different forms under acidic or neutral conditions. It is a biocide widely used as a disinfectant in hospitals and industries and is toxic to aquatic organisms. Its allergic nature leads to hypersensitivity reactions. Contact of glutaraldehyde vapors in endoscopy contributes to Colitis. |
| Contact allergens | Glutaraldehyde is a well-know sensitizer in cleaners and health workers. It can also be found in X-ray developers or in cosmetics. |
| Safety Profile | Poison by ingestion, intravenous, and intraperitoneal routes. Moderately toxic by inhalation, skin contact, and subcutaneous routes. Experimental teratogenic and reproductive effects. A severe eye and human skin irritant. Mutation data reported. When heated to decomp osition it emits acrid smoke and irritating fumes. See also ALDEHYDES. |
| Synthesis | At present, the synthesis methods of glutaraldehyde mainly include pyridine method, pentanediol oxidation method, reduction method, pyran method, cyclopentene oxidation method, pyridine method is to reduce dihydropyridine with sodium metal and methanol and then open the ring of glutaraldehyde oxime by hydroxylamine hydrochloride, then decompose the glutaraldehyde by sodium nitrite and hydrochloric acid, the process route is long, consume a lot of pollution, the cost is no longer suitable for the production of the use of pentanediol oxidation, the depth of oxidation of the reaction The depth of oxidation is not easy to control, and glutaraldehyde is very easy to oxidize, resulting in the existence of low product yield, high cost and other determinations; cyclopentene oxidation method, the use of acid-catalyzed hydrogen peroxide oxidation of cyclopentadiene, with the study of non-homogeneous catalysts, the method embodies a great potential, but at present there is still a catalyst to set up a small number of times, the shortcomings of the lower conversion rate of glutaraldehyde, temporarily unable to meet the requirements of the industrialization; pyran method, the use of acetylene and aliphatic alcohols to produce Vinyl ether, then vinyl ether and acrolein reaction to synthesize 2-alkoxy-3.4-dihydropyran, and then hydrolyzed to glutaraldehyde. The pyran method is relatively mature, with mild reaction conditions, simple operation, good product quality, high yield, little environmental pollution, and suitable for industrial production. |
| Potential Exposure | Glutaraldehyde is used in leathertanning; in embalming fluids; as a germicide; as across-linking agent for protein and polyhydroxy materi als; as a fixative for tissues; and as an intermediate.Buffered solutions are used as antimicrobial agents inhospitals. |
| Shipping | UN2810 Toxic liquids, organic, n.o.s., HazardClass: 6.1; Labels: 6.1-Poisonous materials, TechnicalName Required. |
| Purification Methods | Likely impurities are oxidation products-acids, semialdehydes and polymers. It can be purified by repeated washing with activated charcoal (Norit) followed by vacuum filtration, using 15-20g charcoal/100mL of glutaraldehyde solution. Distil it at 60-65o/15mm, discarding the first 5-10%, then dilute with an equal volume of freshly distilled water at 70-75o, using magnetic stirring under nitrogen. The solution is stored at low temperature (3-4o), in a tightly stoppered container, and protected from light. Standardise by titration with hydroxylamine. [Anderson J Histochem Cytochem 15 652 1967, Beilstein 1 IV 3659.] |
| Incompatibilities | Water contact forms a polymer solution.A strong reducing agent. Incompatible with strong acids;caustics, ammonia, amines, and strong oxidizers. Note:Alkaline solutions of glutaraldehyde (i.e., activated glutar aldehyde) react with alcohol, ketones, amines, hydrazines,and proteins. |
| Toxics Screening Level | There are two Initial Threshold Screening Levels* (ITSLs) for glutaraldehyde: ? 0.08 μg/m3 with annual averaging time for chronic exposures ? 2 μg/m3 with 1-hour averaging time for acute exposures. |
| Waste Disposal | Dissolve or mix the materialwith a combustible solvent and burn in a chemical incinera tor equipped with an afterburner and scrubber. All federal,state, and local environmental regulations must be observed. |
Glutaraldehyde Preparation Products And Raw materials
| Raw materials | Ethyl vinyl ether-->Acrolein-->Diethyl 1,4-dihydro-2,6-dimethyl-3,5-pyridinedicarboxylate-->3,4-Dihydro-2H-pyran-->2-ETHOXY-3,4-DIHYDRO-2H-PYRAN-->1,1,5,5-tetramethoxypentane-->CIS-1,2-CYCLOPENTANEDIOL-->1,2-Cyclopentanediol-->2,2'-TRIMETHYLENEBIS-1,3-DIOXOLANE-->3,4-DIHYDRO-2-METHOXY-2H-PYRAN-->Cyclopentene oxide-->Piperidine |
| Preparation Products | L-Aspartic acid-->graft copolymer PAA-G-PIPA microsphere-->novel anticancer microsphere with multifunction-->Modified glutaraldehyde-->2,2'-(1-Methyl-2,6-piperidinediyl)diacetophenon-->1-(2-NITROPHENYL)PIPERIDINE-->trans-1,2-Cyclopentanediol-->CIS-1-BENZYL-2,6-DICYANOPIPERIDINE |
